Latex paint to construction of a new trend ----- airless paint sprayer

Latex paint to construction of a new trend ----- airless paint sprayer

Since the reform and opening up, the domestic per capita income increases every year, and the gradual improvement of living environment and quality of internal and external painting of the living needs of the people is the most important key factor to decide the merits of the living environment and quality of life. Currently the most widely used internal and external decoration materials, water-based latex paint. Non-toxic, harmless, environmental impact, coupled with the use of water-based latex paint wall easy care and rich colors, making it one of the recent years the most popular home decorating decorative materials.

Quite high, the viscosity of the latex paint manufacturers have very strict restrictions on the proportion of the construction of water to dilute the excessive dilution will destroy the structure of the coating system, resulting in poor film adhesion and wear resistance than the usual 10-20%, and weather resistance, etc. are affected, the greater the dilution ratio, the more severely affected, but if the dilution ratio is asking the manufacturers of construction difficulty, coupled with domestic wall paintings in general packaging technology, roller, brush or air spray and other traditional techniques, so that the latex construction efficiency and quality of the paint is difficult to meet international standards, latex paint is the most popular foreign construction methods airless spray technology.

Airless painting, as the name implies, is a micro-air spray technology, the principle is the booster pump booster to 220 kg / cm ^ 2, forcing high-pressure high-speed connection to the hand-painted to achieve atomization of the paint coating extrusion through a narrow nozzle airless spray application, such as glue and paint the construction of the wall there are many obvious benefits, such as:

(1) improve the quality of coating. Airless spray not only able to spray high-viscosity coatings can also be by airless spray latex paint walls smooth, dense, no brush marks roller marks.

(2) to accelerate. The efficiency of the construction of the airless spray 12 square meters up to 300 per hour the traditional Gunshua process 15 times!

(3) increase the utilization of the coating. Film thickness of coating uneven the traditional Gunshua way, the utilization of the coating greatly reduced, airless spraying to ensure that the film is uniform and consistent thickness.

(4) to extend the life of the coating. The paint coating on the surface connected to the mechanical bite force in the high-speed and high-pressure case, the paint particles to the wall of the gap in Hong Kong, film adhesion enhancement, more deeply to extend the life of the membrane.

Spray spray technology invented in the 1990s, early widely used in shipbuilding, steel, heavy industrial projects as the construction industry continues to develop, airless spray technology for spraying related to the construction project has gained the popularity in Europe. America, Southeast Asia and Taiwan.

The building is a century of the great cause of concern for their inevitable requirement to achieve the perfect quality, the proportion of home improvement family, but if the wall behind indelible defects construction technology, and not too unpleasant? Because it has been a high-priced high-quality latex paint, of course, to get the same high quality wall view, why not try a latex paint construction ------ airless spray a successful example?