- Pneumatic Angle Grinder
- Pneumatic Cleaning Gun
- Pneumatic Drill
- Pneumatic Driven Winch
- Pneumatic Grease Gun
- Pneumatic Heavy Duty Rotary Drill
- Pneumatic Hacksaw
- Pneumatic Hand Scaler KC-20
- Pneumatic Impact Wrench 1/2'', 3/4''
- Pneumatic Impact Wrench 1''
- Pneumatic Needle Scaler AMJ-16
- Pneumatic Needle Scaler AMJ-20
- Pneumatic Needle Scaler AMJ-24
- Pneumatic Needle Scaler AMJ-28
- Pneumatic Piston Pump
- Pneumatic Scaling Hammer
- Pneumatic Vacuum Cleaner
Contact Us
Shanghai Allmarine Industry Co.,Ltd.
16-58 Chenbao Road, Malu Industry Park, Jiading Dist., Shanghai City,China.
Tel +86 21-59152099
Fax +86 21-59152055
Fax +86 21-59152055
Email: sales@allmarine.com.cn
Hydraulic quick coupling use points
8/20/2012 7:11:18 PM1.Hydraulic camlock coupling main parts:
a.quick coupling:Cylinder and manifold connections in the hydraulic system piping with 8 quick-change connector, all the the fast connectors at both ends of the threaded both M22 × 1.5.
b.Connector:The hydraulic system is equipped with the M22 ×1.5/M22× 1.5 wire connector 16, is used to the valve block and quick-change connector; cylinder with quick-change connector pipeline connection.
c.High pressure hose:The hydraulic system is equipped with a high pressure hose φ13/M22 × 1.5/20m 4.
2.Installation instructions:
One end of the quick connector mounting, preferably with the cap and the valve block and the cylinder connection, as the fixed end.The other end of the high pressure hose quick disconnect connection as a pipe end. The hydraulic system with the wire 16.There are actually eight pairs of wire is used to connect the valve block with quick coupler, cylinder with quick coupling.Connect the valve block must be added with φ22 combination pad; eight pairs of wire can be used interchangeably. There are eight pairs of wire is used to quick-change fittings and high pressure hose connections. Connection wire on one side with a rubber ring groove with a high-pressure hose attached to the apron must be added with φ16.8 pairs of wire can be interchangeable. But definitely not upside down on a wire connection direction.
a.quick coupling:Cylinder and manifold connections in the hydraulic system piping with 8 quick-change connector, all the the fast connectors at both ends of the threaded both M22 × 1.5.
b.Connector:The hydraulic system is equipped with the M22 ×1.5/M22× 1.5 wire connector 16, is used to the valve block and quick-change connector; cylinder with quick-change connector pipeline connection.
c.High pressure hose:The hydraulic system is equipped with a high pressure hose φ13/M22 × 1.5/20m 4.
2.Installation instructions:
One end of the quick connector mounting, preferably with the cap and the valve block and the cylinder connection, as the fixed end.The other end of the high pressure hose quick disconnect connection as a pipe end. The hydraulic system with the wire 16.There are actually eight pairs of wire is used to connect the valve block with quick coupler, cylinder with quick coupling.Connect the valve block must be added with φ22 combination pad; eight pairs of wire can be used interchangeably. There are eight pairs of wire is used to quick-change fittings and high pressure hose connections. Connection wire on one side with a rubber ring groove with a high-pressure hose attached to the apron must be added with φ16.8 pairs of wire can be interchangeable. But definitely not upside down on a wire connection direction.
