Airless paint spray security technology

1.Spraying ignited flammable paint (below 21 ℃, such as nitrocellulose, etc.), spray pumps and spray objects should be grounded (connected zero). The spray pump should not be placed in the same room of the spraying operation.
2.Gun high pressure hoses, shall not be any alternative, hose fittings shall be made ​​of the conductive material of the specified strength, the maximum resistance of not more than 1M0.
3.Airless paint sprayer before the job is to check the motor, electrical appliances. The body should be grounded (connected zero) Check the suction hose, the loop than the pipe fittings and pressure gauges, high pressure hose and spray gun should be securely connected.
4.Operations should be preceded by no-load operation. Then use the water or solvent operation inspection to confirm the normal operation only after the job.
5.The gun is strictly prohibited on the job, not hand-touch spray paint, the occurrence of injection injury should be immediately connected to hospital for treatment.
6.Airless spraying high-pressure hose in the process of minimum bend radius shall not be less than 250mm.
7.The work of intermittent, when you stop spraying, should be cut off power, close the gun safety lock, lifted the pressure, and the gun on the solvent barrel.
8.The nozzle is clogged, you should first relief, turn off the security lock. Then remove the nozzle cleaning. Holding in addition to the clogging of the nozzle holes, the application of bamboo and wood chips. May not be used as a pass-pin wire and other complicated derogatory Jun goods.
9.Wash gun, not the paint (especially lighted below 21 ℃) playing in the sealed containers.

Previous: Which company's quick coupling is the best?
Next: High pressure airless paint sprayer notes