Oxygen and fuel gas quick coupling

This quick coupling is mainly used for Universal fuse piping, has a large flow, durability, corrosion resistance characteristics.The main material, size, and installation of shape variety.

There are several points to note when we use this quick coupling.Fluid must flow to the plug side from the side of the sleeve.Please use the external thread of control thread sealing material. Mounting thread, please do not exceed the maximum tightening torque to prevent causing damage.Installing hose, never contaminated with oil to prevent the cause of natural fire.Re-install the hose, the hose end from greater than 3 cm at the cut.

When we use oxygen and fuel gas quick coupling, put the hose firmly into the socket to the roots, with a hose belt or nuts.In order to prevent the possession of water should be stored indoors. Do not use a cracked hose, to prevent possible leakage and off.Leak check should be carried out before use, there is a leak, you should immediately stop using and use the new replacement.Should be recognized that the gas torch valve is turned off before connection.