Airless paint sprayer maintenance methods

Airless paint sprayer maintenance methods

A workplace temperature should not fall below 10 ℃.

2, the coating can not be mixed with dust and foreign, to ensure that the paint nozzle unimpeded, to avoid clogging.

3, the operator must be familiar with the airless paint sprayer and mastery of the operational procedures before induction.

4, adjusting the viscosity moderate paint, stir, filter prior to use.

Painting interior paint job, the absolute prohibition of fireworks, spray operation area fire-fighting equipment should be sufficiently effective.

6, the coating pipeline so as not to extreme bending, so as not to cause unnecessary pressure losses and impact of pipeline service life.

Avoid compressed air mixed with water to prevent the rust of drive components, damage to the cylinder.

Pool surface of the spray booth should be kept in the block foam board along the following 20mm, less than should be promptly added.

9, a day after the spraying operation is completed, or replacement of the coating species should be clear spray equipment and transmission pipelines within the remnants of paint a day is best restricted to a coating.

10, the barrel bottom cap and steel drums outside the spray conversion, the switch must be in the correct position can not be misplaced.

11, operating after the end should clean the gun for the paint bucket and spray the room off the paint, on a regular basis to salvage floating on the surface of patent leather and paint the block into the water, cleaning the gun mouth coated with Vaseline ointment, it is best to nozzle remove soaked in a solvent.