- Pneumatic Angle Grinder
- Pneumatic Cleaning Gun
- Pneumatic Drill
- Pneumatic Driven Winch
- Pneumatic Grease Gun
- Pneumatic Heavy Duty Rotary Drill
- Pneumatic Hacksaw
- Pneumatic Hand Scaler KC-20
- Pneumatic Impact Wrench 1/2'', 3/4''
- Pneumatic Impact Wrench 1''
- Pneumatic Needle Scaler AMJ-16
- Pneumatic Needle Scaler AMJ-20
- Pneumatic Needle Scaler AMJ-24
- Pneumatic Needle Scaler AMJ-28
- Pneumatic Piston Pump
- Pneumatic Scaling Hammer
- Pneumatic Vacuum Cleaner
Contact Us
Shanghai Allmarine Industry Co.,Ltd.
16-58 Chenbao Road, Malu Industry Park, Jiading Dist., Shanghai City,China.
Tel +86 21-59152099
Fax +86 21-59152055
Fax +86 21-59152055
Email: sales@allmarine.com.cn
Cautions about airless paint sprayer
5/1/2012 5:38:28 PMCautions about airless paint sprayer
First, the handling precautions
1, when the spraying, not to fingers, hands or anywhere on the body contact with the nozzle.
2 gun port toward themselves or others is strictly prohibited.
3, non nozzle jacket to remove the spray.
4, in addition to spraying or cleaning at any time must be the gun insurance closed.
5, during the repair or maintenance of any such equipment before relief.
6, the cleaning, do not use bleach or strong acid solvent.
7, must be equipped with the appropriate power supply regulator.
Second, the Construction Notes
1, in good ventilation and lighting adequate place construction.
2, Do regional sparks or combustible construction.
3, the device is idling in the paint more than 10 seconds.
4, spraying equipment can not be used with glue composition or containing particles and solvent-free or with strong corrosive paint spraying.
5, this spraying equipment can only use 220 volts single phase is strictly prohibited connected to 380 volt power supply, otherwise it will burn the motor.
6, and then unplug the power outlet, never pull the device power cord.
7, spraying, do not smoke.
Do not underestimate any injury situation. If not handled properly may lead to serious consequences. Injury can be sure to consult a doctor.
