The wilden pump Troubleshooting

The wilden pump Troubleshooting

 

Pump no action or action is very slow

Check the air inlet side of the filter or air filter impurities

Check the air valve is stuck with cleaning fluid to clean the air valve

Check air switch for wear, if necessary, replacement of the parts

Check the seal parts of the intermediate situation, if badly worn, you can not do the sealing effect of the air from the air outlet side drain. wilden pump the sealing part is a special deal with material, do not replace other brand name products

Check the air switch is normal piston

If you need to add a lubricating oil pump, check the types of lubricants, lubricants added above the recommended oil viscosity, the piston may be stuck or not functioning properly. The wilden pump recommend the use of special thin and antifreeze oils (ISO grades 15/5wt frost oil)

 

Pump action, but the flow is small or no liquid outflow

Check the pump vortex vacuum in order to reduce the pump speed to read the liquid into the wetted cavity, and then increase the speed

The check valve ball is stuck. If the elastic region of the operating liquid pump is not compatible with the phenomenon of elastic seven will be inflated, replace the appropriate elastomer material

Check the pump inlet connector locking does not leak, especially in the inlet end of the ball near the beam deduction shall be locking